Steuerelemente
- Widget
Platzieren Sie das Widget auf Ihrem Startbildschirm

- Verbindungsanzeige, Drücken von schaltet ein - schaltet das Bluetooth-Gerät aus.
- Einschalten - Schaltet den Programmdienst aus.
- Wenn Sie auf den Namen des verbundenen Geräts klicken, wird die Anwendung geöffnet.
- Durch Drücken der Batteriestandsanzeige wird die Anwendung geöffnet.
- Durch Drücken der Audioverstärkeranzeige wird das Audioverstärkerfenster geöffnet.
- Benachrichtigungsfeld

- Verbindungsanzeige, Drücken von schaltet ein - schaltet das Bluetooth-Gerät aus.
- Einschalten - Schaltet den Programmdienst aus.
- Durch Drücken der Batterieladeanzeige wird die Batterie überprüft.
- Wenn Sie auf den Namen des verbundenen Geräts klicken, wird die Anwendung geöffnet.
- Durch Drücken der Audioverstärkeranzeige wird das Audioverstärkerfenster geöffnet.
- Erhöhen oder verringern Sie die Klangverstärkung.
- Tonverstärker

- Schalten Sie die Tonverstärkung ein.
- Durch Drücken wird der eingebaute Equalizer eingeschaltet.
- Wählen Sie den Kanalverstärkungsmischer oder den Google Media Player.
- Kontrolle erlangen.
- Anwendungseinstellungen

- Battery test settings window: - by changing the track of the player, - instead of calling the voice assistant; The minimum time between checks or changing tracks of the player; Number of tracks between battery checks.
- Enabling and tasking the battery check time interval.
- Enabling and configuring voice sounding of the battery charge level of the bluetooth audio device.
- Enable - disable the sound signal for connecting the bluetooth audio device.
- Energy saving setting (disable to run the program in standby mode)
- The program runs in the background.
- Airpods or TWS bluetooth audio device
to the application with Airpods TWS or bluetooth devices must be granted " Positioning "
.
- Scanning for Bluetooth LE devices. If you are not using an Airpods or TWS audio device, turn it off to conserve battery power.
FAQ
- Correction of problems with connecting bluetooth devices.
- Click
and see the list of the charged bluetooth devices. If the device you want is not there, you need to pair it.
- Restart bluetooth audio device (turn off-turn on).
- Press
to restart the bluetooth and reset the program.
- Execute:
press
- clearing bluetooth cache 1.2 
- clear bluetooth 1.3 data 
- or stop bluetooth 4.
- Restart your phone.
- Check the health of the selected bluetooth audio device.
- Increase the time between voice messages about the battery level (for Android devices with a built-in battery checker for bluetooth devices).
- Open Battery Test Settings

- Stellen Sie die Mindestzeit zwischen den Tracks auf 1 Minute oder mehr ein.
